Hydrogen Peroxide Testing Instructions

COMPONENTS
  • 1 - TAYLOR Test Tube 44mL.
  • 1 - TAYLOR-R0601 Molybdate Reagent 60 mil.
  • 1 - TAYLOR-R0664 Bleach Reagent #1 60 mil.
  • 1 - TAYLOR-R0774 Thiosulfate Reagent 60 mil.

PROCEDURES:
  1. Rinse and fill 44mL sample tube to 25mL mark with water to be tested.
  2. Add 10 drops of R-0664 BLEACH REAGENT #1.
    Swirl to mix.
  3. Add 10 drops of R-0601 MOLYBDATE REAGENT.
    Swirl to mix.
    Sample will turn yellow (yellow-orange) if Hydrogen Peroxide is present.
  4. Add R-0774 THIOSULFATE REAGENT dropwise, swirling and counting after each drop, until color changes from yellow (yellow-orange) to colorless or clear.
    Always hold bottle in vertical position.
  5. Multiply drops of R-0774 THIOSULFATE REAGENT by 5. Record as parts per million (PPM) of Hydrogen Peroxide.
  6. Desirable range is 30 to 80 PPM.

*** PLEASE REMEMBER ***

All Chemicals should be kept dry and out of reach of children and pets.
NEVER MIX CHEMICALS. Add chemicals to water… NOT water to chemicals.
In case of emergency, call: 1-800-332-3073 Rocky Mtn. Poison Center.Please Call MR POOL Inc. if any questions and/or for all your pool/spa needs: supplies, repairs, chemicals
and replacement parts, etc. Enjoy!!

 

  

     Home  —  Custom Pools, Spas, and Water Features    —  Maintenance  —  Coleman Spas  —  Art Gallery  —  Contact Us